Conveyor Belt
Conveyor Belts are robust and durable rubber plied or solid woven belts. It comes with abrasion and impact resistant, plied with rubber covers. The carcass is made up of 4 plies; each is separated by a rubber layer. The upper and lower fabrics of the belt are then covered with a final rubber cover.
Conveyor Belt Technical Data Sheet:
| DIMENSIONS | Testing Standards | Results | Tolerance |
| Operating temperature | -20 to 80°C | ||
| Belt Thickness | ISO 583 | 10 mm | Up to 10mm: ±1mm and according to ISO14890 |
| Top cover thickness | ISO 583 | 5 mm | -0.3mm |
| Bottom cover thickness | ISO 583 | 1.5 mm | -0.2mm |
| Width | ISO 251 | 1000 mm | +/- 1% |
| Belt weight (indicative) | 13,3 Kg/ml | ||
| CONSTRUCTION MECHANICAL PROPERTIES |
Testing Standards | Results | Tolerance |
| Carcass type | Plied | ||
| Warp yarns | Polyester | ||
| Number of plies | 4 | ||
| Tensile strength warp | ISO 283 | > 500 N/mm | |
| Elongation at break warp | ISO 283 | > 10% | |
| Elongation under 10% load | ISO 283 | < 1,5% | |
| Adhesion between cover and carcass | ISO 252 | > 4 N/mm | |
| Adhesion between plies and plies | ISO 252 | > 4,5 N/mm | |
| COVER MECHANICAL PROPERTIES | Testing Standards | Results | Tolerance |
| Tensile strength at break | ISO 37 | > 14 Mpa | |
| Elongation at break | ISO 37 | > 400 % | |
| Abrasion | ISO 4649 | < 150 mm3 | |
| Hardness | ISO 868 | 62 | +/- 5 Shore A |
